Mickael
The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.
Its cutting edge is straight with a double bevel.
High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.
Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.
| W | L handle | Code |
|---|---|---|
| 2 | 125 | STUB550102 |
| 4 | 125 | STUB550104 |
| 6 | 125 | STUB550106 |
| 8 | 125 | STUB550108 |
| 10 | 125 | STUB550110 |
| 12 | 125 | STUB550112 |
| 14 | 125 | STUB550114 |
| 16 | 125 | STUB550116 |
| 20 | 125 | STUB550120 |
| 25 | 145 | STUB550125 |
| 30 | 145 | STUB550130 |
| 35 | 145 | STUB550135 |
| 40 | 145 | STUB550140 |
| 50 | 145 | STUB550150 |
| 60 | 145 | STUB550160 |
Top quality sharpening cabinet.
With comfortable work in mind, this sharpening station is adjustable in height.
Drawers specially designed to fit the TORMEK® accessory kits. Practical storage for all sharpening accessories and devices.
Sturdy steel design with scratch resistant metallic coating and rounded corners.
The TORMEK® sharpening station will fit easily into your workshop!
Dimensions
Height: between 750 mm to 830 mm
Width: 578 mm
Depth: 390 mm
| Code | |
|---|---|
| Sharpening Station Top quality sharpening cabinet with purposed designed drawers to fit the Tormek accessory kits. Convenient storage for all the jigs and accessories needed for sharpening all kinds of edge tools. Sturdy steel design with scratch resistant metallic coating, rounded corners and Tormek logo. Fits easily into your workshop and you will be able to adjust to your ideal working height. Height 750-830 mm (29½"–32½"), width 578 mm (22¾"), depth 390 mm (153/8"). |
TORMTS740 |
The Tormek grindstones are well known for grinding efficiency and extended stone life. If you take good care of your stone, you can expect to use it for many years to come.
Presentation of the range
There are four different types of grindstones, all optimised with the special qualities required for different applications. Common to all the Tormek® grindstones is that they are designed to give your tool a sharp and durable edge .
Original grindstone
The original Tormek® grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and long life.
The Tormek® Blackstone Silicon grindstone is more aggressive than the original Tormek® grindstone. It is developed for HSS, other exotic alloyed steels and wide bevel tools. It can also work with tungsten carbide.
Japanese grindstone
The Tormek® Japanese Waterstone has a grit size of 4,000 and provides an excellent surface finish on hand tools requiring little sharpening. It is ideal for sharpening carving tools. Designed to achieve the smoothest possible surface, it removes very little material and therefore cannot be used to form a tool edge.
Diamond wheel
The new Tormek® diamond wheels come in three different finishes: coarse, fine and extra fine. The quality of the diamond surface gives a high and constant sharpening capacity, so the wheel always keeps the same diameter. Users who frequently sharpen the same tool will appreciate this feature which simplifies both set-up and sharpening.
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. This stone efficiently cuts all types of tools and steel qualities including HSS. Ø250 mm
Tormek Blackstone delivers faster steel removal on HSS and other exotic alloys than Tormek Original Grindstone. Suitable for tools with large bevel area. It can also touch up carbide. 220 grit.
This stone provides an extra fine surface finish on hand tools where a minimum of steel removal is needed. Ideal for carving tools. 4000 grit. Available in two sizes, 250 mm (for T-8, T-7 and 2000 models) and 200 mm (for T-4, T-3 and 1200 models). Since it is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping a tool.
| Length | Code |
|---|---|
| 300 mm | MESU73356 |
Related products
The original sharpening kit for chain and guiding bar servicing.
Composed by an assembled file handler for the upper plates maintenance, an assembled wooden stick with a flat file and a depth gauge for the chains profundity limiters maintenance and a guiding bars curette to clean the bar and the lubrication holes.
| D | Code |
|---|---|
| 4.0 | TRON558488 |
| 4.5 | TRON558549 |
| 4.8 | TRON558550 |
| 5.5 | TRON558551 |
High quality circular saw blade for formatting requiring perfect cutting quality. Body rectified and balanced individually, anti-noise and anti-vibration slot.
plywood
| Ø | Kerf | Body | Z | Al | Type | Code |
|---|---|---|---|---|---|---|
| 250 | 3.2 | 2.2 | 80 | 30 | TF NEG | LC2508021E |
Related products
Reading 1/10.
Steel arm - ABS handle
also measures the thickness of brake pads (automotive industry)
Arm length: 138 mm
Total legngth: 313 mm
Handle length: 100 mm
Weight: 200 g
| Code |
|---|
| MESU263005 |
To measure radii, diameters, lengths and thicknesses. Easy to use thanks to its compact size.
Dimensions : 175 x 15 x 0.5 mm
Weight : 7.5 g
| Measure length | Rayon | Code |
|---|---|---|
| 150 mm | 0.5 - 7 | MESU73570 |
| 150 mm | 8 - 15 | MESU73571 |
A compact diameter taper gauge and ruler all in one.
Handy clip for depth measurement and to store the tool in your pocket.
Thickness : 1.2mm
Precision : 0.05mm
Materiel : Stainless steel
| Measure length | Code |
|---|---|
| 1 - 15 mm | MESU62600 |
| 15 - 30 mm | MESU62605 |
For cutting or assembly marking.
Graduation drilled every 5 mm on short arm.
Thickness 1.5 mm.
| Length | Angle | Code |
|---|---|---|
| 450 / 210 | 90° | MESUM908 |