Mickael
(LC250X3)
Cutting, universal, finishing... the right blade for every sawing job!
Al. : 30
Ø; 250 - Kerf: 3.2 - Body: 2.2 - Z: 24 – Application: Cutting - Type: AKB ATB
Ø; 250 - Kerf: 3.2 - Body 2.2 - Z: 48 – Application: Universal - Type: ATB
Ø; 250 - Kerf: 3.2 - Body 2.2 - Z: 80 – Application: Panel finishing- Type: TF POS
| Code |
|---|
| LC250X3 |
Published in
Panels
Tagged under
(RFMPF001-01)
| Largeur | Epaisseur | Pas | Code |
|---|---|---|---|
| 10 | 0.4 | 04 | RFMPF100.4NV04 |
| 10 | 0.5 | 04 | RFMPF100.5NV04 |
| 10 | 0.5 | 06 | RFMPF100.5NV06 |
| 10 | 0.5 | 08 | RFMPF100.5NV08 |
| 10 | 0.6 | 06 | RFMPF100.6NV06 |
| 10 | 0.6 | 08 | RFMPF100.6NV08 |
| 15 | 0.4 | 04 | RFMPF150.4NV04 |
| 15 | 0.4 | 06 | RFMPF150.4NV06 |
| 15 | 0.4 | 08 | RFMPF150.4NV08 |
| 15 | 0.5 | 04 | RFMPF150.5NV04 |
| 15 | 0.5 | 06 | RFMPF150.5NV06 |
| 15 | 0.5 | 08 | RFMPF150.5NV08 |
| 15 | 0.6 | 04 | RFMPF150.6NV04 |
| 15 | 0.6 | 06 | RFMPF150.6NV06 |
| 15 | 0.6 | 08 | RFMPF150.6NV08 |
| 15 | 0.6 | 10 | RFMPF150.6NV10 |
| 15 | 0.7 | 06 | RFMPF150.7NV06 |
| 15 | 0.7 | 08 | RFMPF150.7NV08 |
| 15 | 0.7 | 10 | RFMPF150.7NV10 |
| 20 | 0.4 | 04 | RFMPF200.4NV04 |
| 20 | 0.4 | 05 | RFMPF200.4NV05 |
| 20 | 0.4 | 08 | RFMPF200.4NV08 |
| 20 | 0.5 | 04 | RFMPF200.5NV04 |
| 20 | 0.5 | 06 | RFMPF200.5NV06 |
| 20 | 0.5 | 08 | RFMPF200.5NV08 |
| 20 | 0.5 | 10 | RFMPF200.5NV10 |
| 20 | 0.6 | 04 | RFMPF200.6NV04 |
| 20 | 0.6 | 06 | RFMPF200.6NV06 |
| 20 | 0.6 | 08 | RFMPF200.6NV08 |
| 20 | 0.6 | 10 | RFMPF200.6NV10 |
| 20 | 0.7 | 08 | RFMPF200.7NV08 |
| 20 | 0.7 | 12 | RFMPF200.7NV12 |
| 20 | 0.8 | 10 | RFMPF200.8NV10 |
| 25 | 0.4 | 06 | RFMPF250.4NV06 |
| 25 | 0.4 | 10 | RFMPF250.4NV10 |
| 25 | 0.5 | 06 | RFMPF250.5NV06 |
| 25 | 0.5 | 08 | RFMPF250.5NV08 |
| 25 | 0.6 | 06 | RFMPF250.6NV06 |
| 25 | 0.6 | 08 | RFMPF250.6NV08 |
| 25 | 0.6 | 09 | RFMPF250.6NV09 |
| 25 | 0.7 | 04 | RFMPF250.7NV04 |
| 25 | 0.7 | 06 | RFMPF250.7NV06 |
| 25 | 0.7 | 08 | RFMPF250.7NV08 |
| 25 | 0.7 | 09 | RFMPF250.7NV09 |
| 25 | 0.8 | 08 | RFMPF250.8NV08 |
| 25 | 0.8 | 10 | RFMPF250.8NV10 |
| 30 | 0.5 | 08 | RFMPF300.5NV08 |
| 30 | 0.6 | 06 | RFMPF300.6NV06 |
| 30 | 0.6 | 09 | RFMPF300.6NV09 |
| 30 | 0.6 | 10 | RFMPF300.6NV10 |
| 30 | 0.6 | 12 | RFMPF300.6NV12 |
| 30 | 0.7 | 08 | RFMPF300.7NV08 |
| 30 | 0.7 | 09 | RFMPF300.7NV09 |
| 30 | 0.7 | 10 | RFMPF300.7NV10 |
| 30 | 0.8 | 10 | RFMPF300.8NV10 |
| 35 | 0.5 | 10 | RFMPF350.5NV10 |
| 35 | 0.6 | 10 | RFMPF350.6NV10 |
| 35 | 0.6 | 12 | RFMPF350.6NV12 |
| 35 | 0.7 | 10 | RFMPF350.7NV10 |
| 35 | 0.7 | 12 | RFMPF350.7NV12 |
| 35 | 0.8 | 10 | RFMPF350.8NV10 |
| 40 | 0.6 | 10 | RFMPF400.6NV10 |
| 40 | 0.6 | 12 | RFMPF400.7NV12 |
| 40 | 0.6 | 12 | RFMPF400.6NV12 |
| 40 | 0.6 | 14 | RFMPF400.6NV14 |
| 40 | 0.7 | 10 | RFMPF400.7NV10 |
| 40 | 0.7 | 14 | RFMPF400.7NV14 |
| 40 | 0.8 | 10 | RFMPF400.8NV10 |
| 40 | 0.8 | 12 | RFMPF400.8NV12 |
| 40 | 0.8 | 14 | RFMPF400.8NV14 |
| 45 | 0.6 | 15 | RFMPF450.6NV15 |
| 45 | 0.7 | 10 | RFMPF450.7NV10 |
| 45 | 0.7 | 12 | RFMPF450.7NV12 |
| 45 | 0.7 | 15 | RFMPF450.7NV15 |
| 45 | 0.8 | 15 | RFMPF450.8NV15 |
| 50 | 0.7 | 10 | RFMPF500.7NV10 |
| 50 | 0.7 | 12 | RFMPF500.7NV12 |
| 50 | 0.7 | 14 | RFMPF500.7NV14 |
| 50 | 0.8 | 14 | RFMPF500.8NV14 |
| 50 | 0.9 | 12 | RFMPF500.9NV12 |
Published in
Resharpenable band saw blades
Tagged under
(CMTK906)
Versatile flush trim bits with a bearing for efficient work on wood and laminates.
These tools have a shank diameter of 6.35mm (1/4") and are provided with two well-sharpened carbide cutting edges for a smooth surface to the touch.
| D | l | L | S | Z | Code |
|---|---|---|---|---|---|
| 9.5 | 14 | 56 | 8 | 2 | CMTK906-096 |
| 12.7 | 25.4 | 67 | 8 | 2 | CMTK906-127 |
| 19 | 25.4 | 67 | 8 | 2 | CMTK906-191 |
Published in
Contractor
Tagged under
(TORM04-11)
The easy to use composite honing disc has a built-in polishing agent that removes the hard edge.
Suitable for use in clean environments. No need to add hone compound.
Compatible with Tormek® T-8, Tormek® T-7 and Tormek® 2000.
Tip when honing!
Moisten the composite honing disc with a little water for smoother honing. Use a sponge or cloth.
| Code |
|---|
| TORMCW220 |
Published in
water cooled sharpening system tormek®
Tagged under
(MART013-03)
The revolutionary aluminium hammer
Lighter, stronger with a steel head and purlin.
Lighter, stronger with a steel head and purlin.
Carpenter's hammer
Hammered or smooth head
Aluminium black or blue handle
Vibration-damping system
Hammered or smooth head
Aluminium black or blue handle
Vibration-damping system
| D | L | Head weight | Code | ||
|---|---|---|---|---|---|
| 38 | 406 | 0.393 |  |
Color black - Striated face | MARTALBKM |
Related products
Published in
Framing hammers
Tagged under
(TORM08-09)
To be used on leather honing wheels. Average grain size 3 microns. Hones and polishes the edge.
| Code |
|---|
| TORMPA70 |
Published in
water cooled sharpening system tormek®
Tagged under
(TORM08-08)
Concentrate to make water non-corrosive. Always use with diamond wheels and can also be used with standard grindstones.
| Code |
|---|
| TORMACC150 |
Published in
water cooled sharpening system tormek®
Tagged under
(TORM08-07)
The edge marker with a chisel tip is designed to easily colour the bevel when you want to find and replicate the tools existing edge angle.
| Code | |
|---|---|
| TORMEM-15 | |
| Display for 50 markers | TORMEM-15MP50 |
Published in
water cooled sharpening system tormek®
Tagged under
(TORM08-06)
The set contains 9 extra labels so you can record your favourite profiles on all your bowl gouges, spindle gouges and skews.
| Code |
|---|
| TORMPL01 |
Published in
water cooled sharpening system tormek®
Tagged under
(TORM08-05)
Protects your machine from shavings and wood dust. 100 % cotton.
Fits all Tormek® models.
| Code |
|---|
| TORMMH380 |
Published in
water cooled sharpening system tormek®
Tagged under