• Home
Mickael

Mickael

Ellipse & circle cutting jigEllipse & circle cutting jigEllipse & circle cutting jigEllipse & circle cutting jigEllipse & circle cutting jigEllipse & circle cutting jig
(CMT3000)

This product has been designed for cutting ellipses and circles with any router types. You can make ellipses and circles for windows, doors and any other application. By using two slides into the T-slot you can cut ellipses, whereas if you use one slide, you can cut circles.
ELLIPSE & CIRCLE CUTTING JIG
- Precise and rapid creation of ellipses and circles.
- Simple setup and effective operating.
- Clamping system for any type of routers.
- Special plastic cross frame with excellent sliding performance.
- Precisely machined T-slots and steel sliders.
- Zinc-coated metal parts to prevent rust.
- Delivered in a carton box along with instruction manual.
CMT3000 ELLIPSE JIG INCLUDES :
- 1 cross frame.
- 2 sliders.
- 1 connector plate.
- 3 400mm bars.
- 2 Ø10mm fence rod.
- 1 spanner set.

Code
Ellipse & circle cutting jig CMT3000
400mm robust bar to extend the working radius CMT3000-7
2-Pcs. of fence rod for routers with bars up to Ø8mm in diameter CMT3000-8
Ø170x15mm Derlin® guide plate for CMT3000 to be used with CMT7E et CMT8E CMT3000-SB1
Universal boring templateUniversal boring templateUniversal boring template
(CMT900)

Boring hinges.
Drilling dowels.
Drilling shelf supports.
The universal boring jig is designed for precision manual dowelling to drawing for increased productivity, furniture elements with 32 mm Euro screws to make holes for shelf supports of a 3 mm and 5 mm diameter and to make and mark holes for hinges. The CMT900 jig is designed to make pre-holes for the most common hinges.
The CMT900 INCLUDES :
- Laminated Pertinax boring jig.
- Set of end stops.
- Set of end stops for big-sized elements.
- Centring pin for hinge holes.

SPECIFICATIONS :

Maximum width of board with fixing: 900mm.
No limit.
Thickness of board : No limit.
For dowels up to: Ø8mm.
Hole spacing: 32mm.
Number of holes: 26.
For shelf supports: Ø3mm, Ø5mm
For hinges: Ø3mm for wooden screws.

Ø3mm for Euro screws.

Code
Universal drill guide CMT900
Boring adaptor for CMT656, CMT900 CMT400-1
Boring adaptor for CMT656, CMT900 CMT400-2
Spare clamp (optional) CMT400-3

Related products

Kitchen worktop jigKitchen worktop jigKitchen worktop jigKitchen worktop jig
(CMT650)

FOR PERFECT JOINTS
For kitchen worktops from 420mm to 650mm in width, CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick.
JIG INCLUDES :
- 1 phenolic template.
- 3 zinc-coated steel location bush.
- 1 adjustable end stop.
- 1 instruction manual.
JIQ REQUIRES :
- A portable router.
- A Ø30mm guide bush.
- A Ø12mm HW straight bit.
- Two clamps.
CMT650 IS DESIGNED FOR Ø12MM STRAIGHT BITS :
- Template made of stable and hardened material.
- For 90° and 45° joints.
- Integrated templates for rounding over and chamfering edges.
- Extra location bush for worktop width of 600mm.
- Two integrated templates for panel bolt recesses.
- Delivered with a clear and comprehensive instruction manual.

COMBINATION ROUTERS/ACCESSORIES

Router Guide bush Base plate
CMT7E 899.007.00 CMT300-SB
CMT8E 899.007.00 CMT300-SB
NON-CMT 899.007.00 CMT300-SB1

Edge banding iron
(CMTDET-004)

Apply pre-glued edge banding easily and accurately. The iron non-stick surface allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base to place iron when not using it.
- Includes thermostatic heat control.
- Non-stick coating.
- Specially shaped shoe with rounded edges.
- Metal stand.
- 154cm (5-1/2') power cord, 230V.

TECHNICAL FEATURES :
- Voltage: 230V.
- Electric current: 2.5A.
- Low temperature: 70° ±10° C.
- High temperature: 150° ±10° C.

Code
CMTDET-004
Laminate/veneered cutter
(CMTDET-003)

A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on roller bearings will trace the cutting line. Use the micrometer knob on the top of the tool to set the cutting thickness, or adjust the strip width by using the metric/inch scale provided. Loosen the lock knob on the scale, move the metal bracket which holds the fence and tighten the lock knob again on the desired cutting width.

TECHNICAL FEATURES :
- Cutting width: 12~110mm (15/32" ~ 4-21/64").
- Cutting depth: 0~2mm (0 ~ 5/64").
- Weight: 1.2 kg.

Code
CMTDET-003
CMT333-03 - Spare parts and accessories for universal hinge boring system
(CMT333-03.RIC)

Spare parts and accessories for Universal hinges boring system.

Code
GRASS hinge boring head CMT333-4211
BLUM, SALICE, HÄFELE and HETTICH hinge boring head CMT333-4595
MEPLA hinge boring head CMT333-4809
CREMONESE window handles boring head CMT333-4300
SALICE hinge boring head CMT333-4806
HETTICH, WÜRTH hinge boring head CMT333-5255

Related products

Double-edge trimmer
(CMTDET-001)

Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2") and 25mm (1"), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a tapering cut. Both cutters are made from high-quality hardened steel and can be easily replaced when worn out.

Code
Spare knives CMTDET-001K
7-bushing template guide kit7-bushing template guide kit
(CMT-TGA)

A practical 7-bushing brass kit that will extend the possibilities of your router. For template-controlled operations such as dovetailing, stair routing, hinge butt routing, lock face routing and more general template tasks. These template guides can be used with any router featuring a 30mm (1-3-/16") bore baseplate.
Kit includes :
- 1 adapter ring with 4 holes.
- 7 template guides.
- 2 lock nuts.
Fits the most popular routers. Requires CMT's base 899.000.01 o 899.000.02.
To be assembled like Inlay-kit art.899.000.01

Q.ty 1 1 1 1 1 1 1 2
Internal diameter (mm) 15,87 16,66 13,49 10,31 8,73 7,14 6,35 Lock Nut
Outside diameter (mm) 20,24 19,05 15,87 12,7 11,11 9,52 7,93 Lock Nut
Height 14,28 14,28 14,28 7,93 3,96 7,93 3,96

Q.ty 1 1 1 1 1 1 1 2
Internal diameter (inches) 5/8 21/32 17/32 13/32 11/32 9/32 1/4 Lock Nut
Outside diameter (inches) 51/64 3/4 5/8 1/2 7/16 3/8 5/16 Lock Nut
Height 9/16 9/16 9/16 5/16 5/32 5/16 5/32

CMT334 - Spare parts for BLUM, SALICE, HÄFELE and HETTICH hinge boring headCMT334 - Spare parts for BLUM, SALICE, HÄFELE and HETTICH hinge boring headCMT334 - Spare parts for BLUM, SALICE, HÄFELE and HETTICH hinge boring head
(CMT334.RIC)

D l S Rotation Code
35 38.5 10x20 DROITE Hinge boring bit CMT39335011
8 38.5 10X18 GAUCHE Blind hole drill bit CMT39308012

Related products

CMT Inlay kitCMT Inlay kitCMT Inlay kitCMT Inlay kit
(CMT899)

Beautiful, professional-quality inlays aren't as difficult as they teem. In fact, they are easy with CMT inlay kit. Just remove and reassemble the small bushing to make the recess in the workpiece and cut out the inlay. Perfect for toy making, puzzle making, lettering and lots of other decorative projects. Use the spiral bit for routing MDF, or the straight bit for natural wood.

S Code
6.35 Inlay kit with 3,2mm (1/8") HWM spiral bit CMT89905100
6.35 Inlay kit with 3,2mm (1/8") HWM straight bit CMT89905200
Copper Guide CMT89900100
Phenolic Neutral base for Inlay-Kit CMT89900001
Prebored base for CMT7E/CMT8E for Inlay-kit CMT89900002

Related products

Page 61 of 144