Mickael
Wax for perfect cooling and lubrication.
| Volume | Code |
|---|---|
| 100 mL | CMT552-WAX |
Related products
Diamond grit edge hole saws have been specially developed for the drilling of hard materials (porcelain, gres, granite, hard stone, fiber cement board, ...). Filled with cooling wax.
TECHNICAL FEATURES :
- Special side holes.
- Fast & easy center drill change.
- Thin cutting edge.
Diamond grit premium grade
Well-shaped and extremely strong cubo-octahedral inclusion-free heat-resistant crystals delivers fast, clean cuts up to 10 times longer life.
Diamond grit edge hole saws have been specially developed for professionals that need to drill in extremely hard materials where it is increasingly difficult to drill with conventional hole saws. These hole saws guarantee excellent performance and superior lifetime!
Materials :
- Floor tiles (porcelain, gres, quarry).
- Wall tiles (porcelain, gres, quarry).
- Hard stones (granite, marble), Okite.
- Solid bricks.
- Sandwich materials.
- Masonry.
- Gypsum/plasterboard.
- Fiber cement board.
- Fiberglass.
Percussion/hammer action mode must be turned off when using these hole saws. No angle grinder, just a high speed drilling machine (minimum 14V recommended). Always pre-drill with the center drill to achieve the best performance. Accurate drill positioning. Center drill reduces the risk of slipping.
| D | l | L | Masonry, brick, tiles RPM | Code |
|---|---|---|---|---|
| 18 | 35 | 45 | 1500-4000 | CMT552-018 |
| 35 | 35 | 45 | 1500-4000 | CMT552-035 |
| 38 | 35 | 45 | 1500-4000 | CMT552-038 |
| 51 | 35 | 45 | 1500-4000 | CMT552-051 |
| 55 | 35 | 45 | 1500-4000 | CMT552-055 |
| 73 | 35 | 45 | 1500-4000 | CMT552-073 |
| 76 | 35 | 45 | 1500-4000 | CMT552-076 |
| 111 | 35 | 45 | 1500-4000 | CMT552-111 |
Related products
Diamond grit edge hole saws have been specially developed for the drilling of hard materials (porcelain, gres, granite, hard stone, fiber cement board, ...). Filled with cooling wax.
TECHNICAL FEATURES :
- Special side holes.
- Fast & easy center drill change.
- Thin cutting edge.
Diamond grit premium grade
Well-shaped and extremely strong cubo-octahedral inclusion-free heat-resistant crystals delivers fast, clean cuts up to 10 times longer life.
Diamond grit edge hole saws have been specially developed for professionals that need to drill in extremely hard materials where it is increasingly difficult to drill with conventional hole saws. These hole saws guarantee excellent performance and superior lifetime!
Materials :
- Floor tiles (porcelain, gres, quarry).
- Wall tiles (porcelain, gres, quarry).
- Hard stones (granite, marble), Okite.
- Solid bricks.
- Sandwich materials.
- Masonry.
- Gypsum/plasterboard.
- Fiber cement board.
- Fiberglass.
Percussion/hammer action mode must be turned off when using these hole saws. No angle grinder, just a high speed drilling machine (minimum 14V recommended). Always pre-drill with the center drill to achieve the best performance. Accurate drill positioning. Center drill reduces the risk of slipping.
| D | l | Masonry, brick, tiles RPM | Code |
|---|---|---|---|
| 5 | 35 | 1500-4000 | CMT552-005 |
| 6 | 35 | 1500-4000 | CMT552-006 |
| 8 | 35 | 1500-4000 | CMT552-008 |
| 10 | 35 | 1500-4000 | CMT552-010 |
| 12 | 35 | 1500-4000 | CMT552-012 |
| 14 | 35 | 1500-4000 | CMT552-014 |
| 16 | 35 | 1500-4000 | CMT552-016 |
Related products
Guiding bar for the fungicide treatment of stumps when cutting. Left spray.
| Length (") | Type | Code |
|---|---|---|
| 64 | HL | TRON642HLFL104 |
| 75 | HL | TRON752HLFL104 |
| 75 | HL | TRON752HLFL114 |
| 75 | HL | TRON752HLFL149 |
| 82 | HL | TRON822HLFL149 |
Sprocket nose for mechanized cutting with 3/4" pitch chains.
Monobloc steel bar to get maximum results and longer cutting life.
| Length (") | Type | Code |
|---|---|---|
| 42 | HS | TRON422HSFM104 |
| 64 | HS | TRON642HSFL114 |
| 64 | HS | TRON642HSFN104 |
| 65 | HS | TRON652HSFL104 |
| 75 | HS | TRON752HSFN104 |
| 75 | HS | TRON752HSFN114 |
| 75 | HS | TRON752HSFL114 |
| 80 | HS | TRON802HSFN104 |
| 80 | HS | TRON802HSFL104 |
| 80 | HS | TRON802HSFL114 |
| 80 | HS | TRON802HSFN114 |
| 88 | HS | TRON882HSFL114 |
| 90 | HS | TRON902HSFL114 |
| 90 | HS | TRON902HSFN114 |
Interchangeable nose for POWER MATCH bar.
| Type | Thread | Code |
|---|---|---|
| .325 | .050 - .058 - .063 | TRONRN325 |
| .325 | .050 - .058 - .063 | TRON0185 |
| .404 | .050 - .058 - .063 | TRON30855 |
Related products
Power Match® solid body bars may be stamped with XXX, ZZZ or otherletters as they can have different noses installed on the body, therebychanging the part number.
The industry standard for professional users cutting clean wood. Available in standard and reducedweightbodies.
FEATURES & BENEFITS
- Nose fastens with a single rivet, and is securely held by wide, strong, overlapping ears.
- Long nose takes most of the abuse, minimizes wear to the body.
- Super-tough chrome-moly steel provides superior bar-body strength and tough rails with excellent resistance to wear and chipping.
RECOMMENDED SAW SIZES
- 3.5 cu. in (58 cc) and larger
| Length (") | Type | Code |
|---|---|---|
| 13 | RN | TRON138RNDD009 |
| 13 | RN | TRON138RNBK095 |
| 14 | RN | TRON148RNBK095 |
| 15 | RN | TRON158RNDD009 |
| 15 | RN | TRON158RNBK095 |
| 15 | RN | TRON153RNDD025 |
| 16 | RN | TRON163RNBD025 |
| 16 | RN | TRON163RNDD025 |
| 16 | RN | TRON168RNBK095 |
| 16 | RN | TRON168RNDD009 |
| 16 | RN | TRON168RNDK095 |
| 17 | RN | TRON178RNDD009 |
| 17 | RN | TRON173RNFE031 |
| 17 | RN | TRON178RNDB083 |
| 18 | RN | TRON188RNDD009 |
| 18 | RN | TRON188RNDK095 |
| 18 | RN | TRON188RNBK095 |
| 18 | RN | TRON183RNDD029 |
| 18 | RN | TRON183RNDD025 |
| 18 | RN | TRON183RNBD025 |
| 20 | RN | TRON8873D |
| 20 | RN | TRON200RNDD009 |
| 20 | RN | TRON200RNDD176 |
| 20 | RN | TRON203RNDD009 |
| 20 | RN | TRON208RNDD033 |
| 20 | RN | TRON208RNDK095 |
| 20 | RN | TRON203RNDD025 |
| 20 | RN | TRON208RNDD009 |
| 20 | RN | TRON208RNBK095 |
| 20 | RN | TRON208RNDB083 |
| 22 | RN | TRON223RNDD025 |
| 22 | RN | TRON228RNDD009 |
| 24 | RN | TRON248RNDD009 |
| 24 | RN | TRON248RNDK095 |
| 24 | RN | TRON243RNFD009 |
| 24 | RN | TRON240RNDD176 |
| 24 | RN | TRON243RNDD025 |
| 25 | RN | TRON253RNFE031 |
| 26 | RN | TRON268RNDD009 |
| 28 | RN | TRON283RNDD025 |
| 28 | RN | TRON288RNDD009 |
| 30 | RN | TRON308RNDD009 |
| 30 | RN | TRON303RNDD025 |
| 36 | RN | TRON363RNFD009 |
| 36 | RN | TRON363RNDD009 |
| 36 | RN | TRON363RNDD025 |
| 42 | RN | TRON423RNDD009 |
Related products
The bar for woodcutter using small to mid-size saws with .325" or 3/8" chains.
FEATURES & BENEFITS
- Slim symmetrical contour is light in weight, maneuverable, and reversible for long life.
- Small-radius nose helps reduce kickback energies.
- Available in models with the Intenz® tensioning mechanism built into the bar itself.
RECOMMENDED SAW SIZES
- Up to 3.5 cu. in (62 cc)
| Length (") | Type | Code |
|---|---|---|
| 18 | SP | TRON188PXBK095 |
The bar for woodcutter using small to mid-size saws with .325" or 3/8" chains.
FEATURES & BENEFITS
- Slim symmetrical contour is light in weight, maneuverable, and reversible for long life.
- Small-radius nose helps reduce kickback energies.
- Available in models with the Intenz® tensioning mechanism built into the bar itself.
RECOMMENDED SAW SIZES
- Up to 3.5 cu. in (62 cc)
| Length (") | Type | Code |
|---|---|---|
| 13 | ML | TRON130MLBK095 |
| 15 | ML | TRON150MLBK041 |
| 15 | ML | TRON150MLBK095 |