This product has been designed for cutting ellipses and circles with any router types. You can make ellipses and circles for windows, doors and any other application. By using two slides into the T-slot you can cut ellipses, whereas if you use one slide, you can cut circles.
ELLIPSE & CIRCLE CUTTING JIG
- Precise and rapid creation of ellipses and circles.
- Simple setup and effective operating.
- Clamping system for any type of routers.
- Special plastic cross frame with excellent sliding performance.
- Precisely machined T-slots and steel sliders.
- Zinc-coated metal parts to prevent rust.
- Delivered in a carton box along with instruction manual.
CMT3000 ELLIPSE JIG INCLUDES :
- 1 cross frame.
- 2 sliders.
- 1 connector plate.
- 3 400mm bars.
- 2 Ø10mm fence rod.
- 1 spanner set.

Boring hinges.
Drilling dowels.
Drilling shelf supports.
The universal boring jig is designed for precision manual dowelling to drawing for increased productivity, furniture elements with 32 mm Euro screws to make holes for shelf supports of a 3 mm and 5 mm diameter and to make and mark holes for hinges. The CMT900 jig is designed to make pre-holes for the most common hinges.
The CMT900 INCLUDES :
- Laminated Pertinax boring jig.
- Set of end stops.
- Set of end stops for big-sized elements.
- Centring pin for hinge holes.

SPECIFICATIONS :

Related products

• 4 Flute dowel drills
• Universal boring jig

FOR PERFECT JOINTS
For kitchen worktops from 420mm to 650mm in width, CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick.
JIG INCLUDES :
- 1 phenolic template.
- 3 zinc-coated steel location bush.
- 1 adjustable end stop.
- 1 instruction manual.
JIQ REQUIRES :
- A portable router.
- A Ø30mm guide bush.
- A Ø12mm HW straight bit.
- Two clamps.
CMT650 IS DESIGNED FOR Ø12MM STRAIGHT BITS :
- Template made of stable and hardened material.
- For 90° and 45° joints.
- Integrated templates for rounding over and chamfering edges.
- Extra location bush for worktop width of 600mm.
- Two integrated templates for panel bolt recesses.
- Delivered with a clear and comprehensive instruction manual.

COMBINATION ROUTERS/ACCESSORIES

Related products

• Straight router bits with insert knives for laminates
• Straight router bits, long series
• CMT300 - Universal dovetail jig
• CMT300 - Universal dovetail jig

Apply pre-glued edge banding easily and accurately. The iron non-stick surface allows smooth and easy application. The thermostatically controlled short preheat time gets you working quicker. Includes heat resistant metal base to place iron when not using it.
- Includes thermostatic heat control.
- Non-stick coating.
- Specially shaped shoe with rounded edges.
- Metal stand.
- 154cm (5-1/2') power cord, 230V.

TECHNICAL FEATURES :
- Voltage: 230V.
- Electric current: 2.5A.
- Low temperature: 70° ±10° C.
- High temperature: 150° ±10° C.

A very useful hand tool for clean, splinter-free cuts on laminates and veneered with no waste. Place your material into the fence provided and have the cutter run along the edge of the panel. The two opposing steel-made circular cutting blades mounted on roller bearings will trace the cutting line. Use the micrometer knob on the top of the tool to set the cutting thickness, or adjust the strip width by using the metric/inch scale provided. Loosen the lock knob on the scale, move the metal bracket which holds the fence and tighten the lock knob again on the desired cutting width.

TECHNICAL FEATURES :
- Cutting width: 12~110mm (15/32" ~ 4-21/64").
- Cutting depth: 0~2mm (0 ~ 5/64").
- Weight: 1.2 kg.

Spare parts and accessories for Universal hinges boring system.

Code
	GRASS hinge boring head	CMT333-4211
	BLUM, SALICE, HÄFELE and HETTICH hinge boring head	CMT333-4595
	MEPLA hinge boring head	CMT333-4809
	CREMONESE window handles boring head	CMT333-4300
	SALICE hinge boring head	CMT333-4806
	HETTICH, WÜRTH hinge boring head	CMT333-5255

Related products

• Universal hinges boring system
• 4 flute dowel drills
• Hinge boring bits

Attach this trimmer to your workpiece, press both ends against the board for a cutting range between 13mm (1/2") and 25mm (1"), move the trimmer in the correct direction indicated by the arrow. This will cut on both sides easily. The first cutter will cut straight, the second one can be adjusted for a tapering cut. Both cutters are made from high-quality hardened steel and can be easily replaced when worn out.

A practical 7-bushing brass kit that will extend the possibilities of your router. For template-controlled operations such as dovetailing, stair routing, hinge butt routing, lock face routing and more general template tasks. These template guides can be used with any router featuring a 30mm (1-3-/16") bore baseplate.
Kit includes :
- 1 adapter ring with 4 holes.
- 7 template guides.
- 2 lock nuts.
Fits the most popular routers. Requires CMT's base 899.000.01 o 899.000.02.
To be assembled like Inlay-kit art.899.000.01

Related products

• 2400W router with standard equipment
• 1010W router with standard equipment
• CMT Inlay kit

Related products

• BLUM, SALICE, HÄFELE and HETTICH hinge boring head

Beautiful, professional-quality inlays aren't as difficult as they teem. In fact, they are easy with CMT inlay kit. Just remove and reassemble the small bushing to make the recess in the workpiece and cut out the inlay. Perfect for toy making, puzzle making, lettering and lots of other decorative projects. Use the spiral bit for routing MDF, or the straight bit for natural wood.

Related products

• PGD-1 Adjustable Precision Router Dado Jig
• Solid carbide downcut spiral bits
• Straight router bits, long series
• 7-bushing template guide kit