Mickael
| Code | |
|---|---|
| Pad + latch for I-beams 80 x 42 |
SERR0504 |
| I-beam machined arm 80 x 42 |
SERR0505 |
| Pad + latch for I-beams 100 x 50 |
SERR0506 |
| I-beam machined arm 100 x 50 |
SERR0507 |
| Screw + nut for frame | SERR0508 |
| Trestle for frame (pair) | SERR0509 |
Related products
Exclusive assembly of the sliding arm/screw by platelet and by nut inside the guiding shoe (very easy dismantling and replacement of the worn pieces).
Spheroidal cast iron jaws.
Burnished screw with rolled trapezoidal thread (30% more resistant).
| Tightening | Section | Code |
|---|---|---|
| 1500 | 80 x 42 | SERR0496 |
| 2000 | 80 x 42 | SERR0497 |
| 2500 | 80 x 42 | SERR0498 |
| 3000 | 80 x 42 | SERR0499 |
| 1500 | 100 x 50 | SERR0500 |
| 2000 | 100 x 50 | SERR0501 |
| 2500 | 100 x 50 | SERR0502 |
| 3000 | 100 x 50 | SERR0503 |
Related products
| Projection | Rod section | Code | |
|---|---|---|---|
| 80 | 16 x 8 | Sliding arm assembly | SERR0452 |
| 100 | 20 x 10 | Sliding arm assembly | SERR0453 |
| 120 | 22 x 11 | Sliding arm assembly | SERR0454 |
| 120 | 25 x 12 | Sliding arm assembly | SERR0455 |
| 120 | 28 x 14 | Sliding arm assembly | SERR0456 |
| 140 | 25 x 12 | Sliding arm assembly | SERR0457 |
Related products
The clamp allows a powerful and gradual clamping with its lever and its quenched steel trigger.
Eccentric lever for a quick and gradual clamping.Toothed rack with 11 teeth for delicate and precise clamping.Quenched steel trigger.Forged steel bar from one piece.Forged sliding arm of carbon steel, strongly dimensioned.
| Tightening | Projection | Rod section | Code |
|---|---|---|---|
| 160 | 80 | 16 x 8 | SERR0441 |
| 200 | 100 | 20 x 10 | SERR0442 |
| 250 | 120 | 22 x 11 | SERR0443 |
| 300 | 120 | 25 x 12 | SERR0444 |
| 300 | 140 | 25 x 12 | SERR0445 |
| 400 | 120 | 25 x 12 | SERR0446 |
| 500 | 120 | 25 x 12 | SERR0447 |
| 600 | 120 | 25 x 12 | SERR0448 |
| 800 | 120 | 28 x 14 | SERR0449 |
| 1000 | 120 | 28 x 14 | SERR0450 |
| 1250 | 120 | 28 x 14 | SERR0451 |
Related products
The cast iron presses are powerful and lightweight.
Fixing screw with concave pressure adjustable with a 6 face 3mm wrench from size 80mm depth on.
Drawn steel bar, 3 sides notched.
Spheroidal cast iron.
| Tightening | Projection | Rod section | Code |
|---|---|---|---|
| 100 | 50 | 15 x 5 | SERR0401 |
| 150 | 50 | 15 x 5 | SERR0402 |
| 200 | 50 | 15 x 5 | SERR0403 |
| 250 | 50 | 15 x 5 | SERR0404 |
| 300 | 50 | 15 x 5 | SERR0405 |
| 200 | 65 | 20 x 5 | SERR0406 |
| 250 | 65 | 20 x 5 | SERR0407 |
| 300 | 65 | 20 x 5 | SERR0408 |
| 160 | 80 | 25 x 6 | SERR0409 |
| 200 | 80 | 25 x 6 | SERR0410 |
| 250 | 80 | 25 x 6 | SERR0411 |
| 300 | 80 | 25 x 6 | SERR0412 |
| 400 | 80 | 25 x 6 | SERR0413 |
| 500 | 80 | 25 x 6 | SERR0414 |
| 600 | 80 | 25 x 6 | SERR0415 |
| 200 | 100 | 30 x 8 | SERR0416 |
| 250 | 100 | 30 x 8 | SERR0417 |
| 300 | 100 | 30 x 8 | SERR0418 |
| 400 | 100 | 30 x 8 | SERR0419 |
| 500 | 100 | 30 x 8 | SERR0420 |
| 600 | 100 | 30 x 8 | SERR0421 |
| 250 | 120 | 30 x 8 | SERR0422 |
| 300 | 120 | 30 x 8 | SERR0423 |
| 400 | 120 | 30 x 8 | SERR0424 |
| 500 | 120 | 30 x 8 | SERR0425 |
| 600 | 120 | 30 x 8 | SERR0426 |
| 800 | 120 | 30 x 8 | SERR0427 |
| 1000 | 120 | 30 x 8 | SERR0428 |
| 300 | 140 | 35 x 9 | SERR0429 |
| 350 | 140 | 35 x 9 | SERR0430 |
| 400 | 140 | 35 x 9 | SERR0431 |
| 500 | 140 | 35 x 9 | SERR0432 |
| 600 | 140 | 35 x 9 | SERR0433 |
| 800 | 140 | 35 x 9 | SERR0434 |
| 1000 | 140 | 35 x 9 | SERR0435 |
| 400 | 175 | 35 x 9 | SERR0436 |
| 500 | 175 | 35 x 9 | SERR0437 |
| 600 | 175 | 35 x 9 | SERR0438 |
| 800 | 175 | 35 x 9 | SERR0439 |
| 1000 | 175 | 35 x 9 | SERR0440 |
This accessories case with threaded pressure plates/pads contains the following references :
- SERR0391 : Threaded swivel foot
- SERR0392 : Large surface area mobile plate
- SERR0393 : Threaded rubber foot d50 mm
- SERR0394 : Threaded rubber foot d80 mm
- SERR0396 : Pointed pad
- SERR0397 : Angle iron device
- SERR0398 : Extension of L.50 mm
| Code |
|---|
| SERR0532 |
Related products
| Code | ||
|---|---|---|
 |
Threaded swivel foot | SERR0391 |
 |
Large surface area mobile plate To adapt to the angle of the work piece clamped. |
SERR0392 |
 |
Threaded rubber foot d50mm For guaranteed clamping over a large surface area and protects the work piece clamped. |
SERR0393 |
 |
Threaded rubber foot d80mm Guarantees tightening over a wide surface and protects the part tightened. |
SERR0394 |
 |
V pressure plate For horizontal clamping of tubes |
SERR0395 |
 |
Pointed pressure plate For axial clamping of tubes of 30 mm maximum diameter. |
SERR0396 |
 |
Angle iron device This right angle device is used for clamping in an angle iron to ensure optimum hold. |
SERR0397 |
 |
Extension L.50mm For clamping behind angle irons or I-beams, without blocks. |
SERR0398 |
|
Extension L.50mm For clamping behind angle irons or I-beams, without blocks. |
SERR0399 |
 |
Lateral device for edges | SERR0400 |
Related products
The general purpose pumping clamp was made for flexibility. The shaft can be used as a spacer. Accessories can be mount on the clamp.
Internal thread inside the fixed arm and the pump, accessories may be adapted.
Spreading function.
Fixing screw with concave pressure adjustable with a 6 faces 3mm wrench.
Spheroid cast iron, reinforced by triple ribs.
Galvanised and notched bar.
Burnished screw with rolled trapezoidal thread (30% more resistant).
Cut off pump made of burnished steel.
Hydraulic press fit of the fixed jaw on the bar.
| Tightening | Projection | Rod section | Code |
|---|---|---|---|
| 200 | 80 | 30 x 8 | SERR0364 |
| 300 | 80 | 30 x 8 | SERR0365 |
| 400 | 80 | 30 x 8 | SERR0366 |
| 500 | 80 | 30 x 8 | SERR0367 |
| 600 | 80 | 30 x 8 | SERR0368 |
| 800 | 80 | 30 x 8 | SERR0369 |
| 1000 | 80 | 30 x 8 | SERR0370 |
| 300 | 100 | 35 x 9 | SERR0371 |
| 400 | 100 | 35 x 9 | SERR0372 |
| 500 | 100 | 35 x 9 | SERR0373 |
| 600 | 100 | 35 x 9 | SERR0374 |
| 800 | 100 | 35 X 9 | SERR0375 |
| 1000 | 100 | 35 x 9 | SERR0376 |
| 1250 | 100 | 35 x 9 | SERR0377 |
| 1500 | 100 | 35 x 9 | SERR0378 |
| 300 | 150 | 40 x 10 | SERR0379 |
| 400 | 150 | 40 x 10 | SERR0380 |
| 500 | 150 | 40 x 10 | SERR0381 |
| 600 | 150 | 40 x 10 | SERR0382 |
| 800 | 150 | 40 x 10 | SERR0383 |
| 1000 | 150 | 40 x 10 | SERR0384 |
| 1250 | 150 | 40 x 10 | SERR0385 |
| 1500 | 150 | 40 x 10 | SERR0386 |
| 1800 | 150 | 40 x 10 | SERR0387 |
| 2000 | 150 | 40 x 10 | SERR0388 |
| 2500 | 150 | 40 x 10 | SERR0389 |
| 3000 | 150 | 40 x 10 | SERR0390 |
Related products
The galvanised pump clamp will provide strength, resistance, and longevity. Its galvanised shaft and its pump protect totally the screw, avoiding seizing and sparks while welding.
Precise : The pump does not turn nor shift work pieces
Quick clamping : One turn of the cross pin lifts the pump cylinder of 5mm
Powerful : Dual action screw with trapezoidal thread
| Tightening | Projection | Rod section | Code |
|---|---|---|---|
| 400 | 400 | 45 x 12 | SERR0356 |
| 500 | 400 | 45 x 12 | SERR0357 |
| 600 | 400 | 45 x 12 | SERR0358 |
| 800 | 400 | 45 x 12 | SERR0359 |
| 1000 | 400 | 45 x 12 | SERR0360 |
| 1500 | 400 | 45 x 12 | SERR0361 |
| 2000 | 400 | 45 x 12 | SERR0362 |
| 3000 | 400 | 45 x 12 | SERR0363 |
The galvanised pump clamp will provide strength, resistance, and longevity. Its galvanised shaft and its pump protect totally the screw, avoiding seizing and sparks while welding.
Precise : The pump does not turn nor shift work pieces
Quick clamping : One turn of the cross pin lifts the pump cylinder of 5mm
Powerful : Dual action screw with trapezoidal thread
| Tightening | Projection | Rod section | Code |
|---|---|---|---|
| 400 | 200 | 35 x 11 | SERR0347 |
| 500 | 200 | 35 x 11 | SERR0348 |
| 600 | 200 | 35 x 11 | SERR0349 |
| 800 | 200 | 35 x 11 | SERR0350 |
| 1000 | 200 | 35 x 11 | SERR0351 |
| 1500 | 200 | 35 x 11 | SERR0352 |
| 2000 | 200 | 35 x 11 | SERR0353 |
| 2500 | 200 | 35 x 11 | SERR0354 |
| 3000 | 200 | 35 x 11 | SERR0355 |