CMT® accessories (5)
Maintaining control of small stock during drilling operations can be quite challenging, as hand safety is imperative. We recommend our push block, which guarantee safe precision drilling.
| Code |
|---|
| CMT99911042 |
Maintaining control of small stock during drilling operations can be quite challenging, as hand safety is imperative.
We recommend our push stick, which guarantee safe precision drilling.
| Code |
|---|
| CMT99911041 |
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2") to 40mm (1-5/8") thick with unprecedented speed and accuracy.
The heart of the Pocket-Pro system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16") increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-Pro system advantages.
For example :
- Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-Pro system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2") to 40mm (1-5/8") thick.
- Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT's Pocket-Pro joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit. - Plus, with CMT's Pocket-Pro system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more "meat" in the joint.
Check out the Pocket-Pro joinery system today. Easy enough for the beginner and accurate enough for the pro, the Pocket-Pro is the world's most versatile pocket hole jig.
Related products
CMT Adjustable Corner Frame Clamps will easily create the perfect 90 ° angle or handy T-joints typical in shelving, cabinets and frame applications using boards of variable thicknesses from 6.35 to 25.4 mm (1/4 "- 1").
These clamps allow you to work independently, and above all, hands-free to glue, dry-fit, nail, screw, or square your joint securely and accurately – just like a professional.
The special design allows you to immobilize the panels from the inside (hex key) and from the outside (knob) according to your project needs.
Set up is easy as 1-2-3: position the clamp, twist the knob and presto! Equal pressure is instantly applied on each side of the corner and you have a perfectly squared 90 ° joint!
Made of sturdy and durable plastic material, the clamp features a double graduated scale in mm / inches for a broad range of adjustments.
Size : 100 x 100 x 35
Sold in sets of 2 pces
| Code |
|---|
| CMTCFC-002 |