Trapezzahn negativ
(CIRC010-02)
HM-Kreissägeblatt zum Schneiden von NE-Metallen. Negativer Spanwinkel, um das Werkstück auf den Arbeitstisch zu drücken.
NE-Metall
| Ø | Schnitt | Blattkörper | Z | Bohr. | Typ | Code |
|---|---|---|---|---|---|---|
| 250 | 2.8 | 2.2 | 80 | 30 | NF TF NEG | LC2508015M |
| 250 | 3.2 | 2.2 | 80 | 30 | NF TF NEG | LC2508002M |
| 250 | 3.2 | 2.2 | 80 | 32 | NF TF NEG | LC2508006M |
| 250 | 3.2 | 2.5 | 60 | 30 | NF TF NEG | LC2506003M |
| 300 | 3.2 | 2.5 | 72 | 30 | NF TF NEG | LC3007203M |
| 300 | 3.2 | 2.5 | 96 | 30 | NF TF NEG | LC3009604M |
| 300 | 3.2 | 2.5 | 96 | 32 | NF TF NEG | LC3009626M |
| 330 | 3.2 | 2.5 | 84 | 30 | NF TF NEG | LC3308401M |
| 330 | 3.2 | 2.5 | 96 | 30 | NF TF NEG | LC3309603 |
| 330 | 3.2 | 2.5 | 96 | 32 | NF TF NEG | LC3309602M |
| 350 | 3.3 | 2.8 | 96 | 30 | NF TF NEG | LC3509601M |
| 350 | 3.4 | 2.6 | 84 | 30 | NF TF NEG | LC3508405 |
| 350 | 3.4 | 2.8 | 84 | 32 | NF TF NEG | LC3508406M |
| 350 | 3.4 | 2.8 | 96 | 32 | NF TF NEG | LC3509602M |
| 350 | 3.4 | 2.8 | 108 | 30 | NF TF NEG | LC35010805M |
| 350 | 3.4 | 2.8 | 108 | 32 | NF TF NEG | LC35010802M |
| 350 | 3.4 | 2.8 | 120 | 32 | NF TF NEG | LC35012002M |
| 380 | 4.0 | 3.0 | 108 | 32 | NF TF NEG | LC38010803M |
| 400 | 3.8 | 3.2 | 96 | 30 | NF TF NEG | LC4009601M |
| 400 | 3.8 | 3.2 | 96 | 32 | NF TF NEG | LC4009602M |
| 400 | 4.0 | 3.2 | 120 | 30 | NF TF NEG | LC40012001M |
| 400 | 4.0 | 3.2 | 120 | 32 | NF TF NEG | LC40012002M |
| 420 | 4.0 | 3.2 | 108 | 30 | NF TF NEG | LC42010801M |
| 450 | 4.0 | 3.2 | 108 | 30 | NF TF NEG | LC45010803 |
| 450 | 4.0 | 3.2 | 108 | 32 | NF TF NEG | LC45010832M |
| 500 | 4.2 | 3.6 | 120 | 30 | NF TF NEG | LC50012003M |
| 500 | 4.6 | 3.6 | 156 | 30 | NF TF NEG | LC50015601 |
| 550 | 4.4 | 3.6 | 128 | 30 | NF TF NEG | LC55013201 |
| 600 | 4.6 | 4.0 | 140 | 30 | NF TF NEG | LC60014402 |