"Swedish style" carpenter's chisels
This set of tools is designed to remove material thanks to the force of a mallet or the flat of the hand. Also used for cleaning mortises and remove material gradually.

Cork handle

This tool is designed for finishing pieces. It is also used for hollowing and appreciated by beginners as it is easier to use than a ring tool.

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

The bent chisel enables sculptors to achieve finishes that cannot be a performed with a straight chisel.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : finishing relief work, work on cross members and uprights, well worked legs.

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

This gouge is only used by the force of the wrist to hollow deep shapes.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, hollowing and different sizes of moulding.

Set including :
- 1 double bevel straight chisel (l : 25 mm)
- 2 straight chisels (l: 10/20 mm)
- 5 straight flat gouges (l : 6/10/16/25/50 mm)
- 6 straight curved gouges (l : 10/10/16/20/25/50 mm)
- 3 straight U gouges (l : 6/12/16/25 mm)
- 1 single bevel straight chisel (l : 8 mm)
- 1 straight V tool (l : 10 mm)

The set is made up of tools with different profiles

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

Set including :
- 1 double bevel straight chisel (l : 4 mm)
- 2 straight chisels (l: 8/16 mm)
- 3 straight flat gouges (l : 6/10/20 mm)
- 2 straight curved gouges (l : 14/10 mm)
- 2 straight U gouges (l: Set including :
- 1 single bevel straight chisel (l : 6 mm)
- 1 straight V tool (l: 8 mm)
- 1 carving knife
- whittling
- 1 ARKANSAS original sharpening tool

The set is made up of tools with different profiles

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving.

The blade ends in a V-shaped cutting edge, its tip has a slightly rounded or sharp angle. This tool is designed to carve straight lines as well as curves, it is often used by sculptors and furniture restorers.

High quality polished HSS V tool with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Use : preparation of contours for relief , carving lines, lettering and working mouldings.