The straight tool has a body placed in the centre line of the handle allowing for a high cutting power.

The flat gouge allows for several effects : shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

The tool has the special feature of having a straight body and a back bent shape.

The back bent gouge makes rounded cuts in hollow or parts hard to reach with a straight gouge.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, carved consoles, feet and curved pieces.

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for working vertically to horizontally. This angled tool is a must-have for finishing work, hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

The angled chisel has a straight cut, its angled part provides easier access to the bottom of patterns. It allows the handle to be raised so that it can project from the piece and facilitates the movement of the tool.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : work on openwork pieces, finishing of cuts and clearing of engravings

The tool has the special feature of having a straight body and an angled end. This tool is essentially used for vertical to horizontal work. It is the must-have for finishing work, the bent tool allows for hollowing and clearing cuts without using a mallet. A shock on the handle can cause the blade to oscillate and give rise to poor cutting quality.

This gouge is only used by the force of the wrist to hollow deep shapes.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : carving on statues, hollowing and different sizes of moulding.

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Its cutting edge is straight with a single bevel.
Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

Its cutting edge is straight with a single bevel.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

This tool has the special feature of having a slightly curved blade and can be used with a mallet.
It allows for hollowing of the material easily and quickly.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : preparation of hollows, low relief finishing, volume carving, work on hollow or curved pieces.

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for preparation of the work, while those less than 16 mm are for finishing.

The chisel has the special feature of an oblique cutting edge for cutting into the bottom of angles for carving work.

High quality polished HSS chisel with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : arched shapes, straight cuts, lettering and geometric sculptures as well as engravings. For striking and clearing of patterns.

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The flat gouge allows for several effects: shaping, roughing or finishing.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : ornamental carving, preparation of surfaces and volumes

The straight tool has a body placed in the centre line of the handle making for high cutting power. The blade does not bend during carving. Widths greater than 20 mm are intended for the preparation of the work, while those less than 16 mm are for finishing.

The curved gouge has a slight bend to free the ends of the blade to prevent it from getting stuck in the wood.

High quality polished HSS gouge with octagonal beech handle.
The heat treatment of the blade (58-60HRC) guarantees excellent durability.

Uses : precision carving (rosette, lettering, engraving, floral ornamentation, character lines of a face)