Flexible templates for routing
12 corner radius router template set
(CMTTMP-R12)
Our useful 3-piece corner radius template set includes 8mm (5/16") thick acrylic templates that will allow you to make 12 different radii (3 per template) by using a flush trim or a pattern bit (sold separately). Included with the templates you will also find 4 alignment pins and 4 wood screws. Use the pins to align the template onto your workpiece, then use the four wood screws provided to secure it. Remove the alignment pins and use the bit to cut the corner of your workpiece to the same radius as the template.
Set contains :
12 Different rays (3 templates)
4 Alignment pins
4 Wood screw
Possible Achievable :
| MM | Inches | |
|---|---|---|
| 3 | 1/8" | |
| 5 | 3/16" | |
| 6 | 1/4" | |
| 8 | 5/16" | |
| 10 | 3/8" | |
| 11 | 7/16" | |
| 12 | 1/2" | |
| 14 | 9/16" | |
| 16 | 5/8" | |
| 19 | 3/4" | |
| 22 | 7/8" | |
| 25 | 1" |
| Code | |
|---|---|
| For routing radii from 3mm (1/8") to 25mm (1") | CMTTMP-R12 |