Drilling system 3

Chrome steel drilling system 3 Ø 15 - 30 mm

(ZOBO3-01)

System 3 is characterised by a cylindrical housing in the centre of the drill bit receiving a choice of centering points, pilot drills or guide pins. The drill bits of the system 3 are supplied without centering points. Points, pilot drills or guide pins must be ordered separately according to the type of application.

The chrome steel drill bit is particularly suitable for soft and hardwood.

Drilling diameter 15 - 30 mm
Shank diameter 9 mm
Total length 100 mm

D	S	L	Code
15	9	100	ZOBO762090
16	9	100	ZOBO762091
17	9	100	ZOBO762092
18	9	100	ZOBO762093
20	9	100	ZOBO762095
22	9	100	ZOBO762097
25	9	100	ZOBO762100
26	9	100	ZOBO762101
28	9	100	ZOBO762103
30	9	100	ZOBO762105

Carbide drilling system 3 Ø 15-30 mm

(ZOBO3-02)

The carbide drill bit WD HW is particularly suited for hardwood and boards.
Drilling diameter 15 - 30 mm
Shank diameter 9 mm
Total length 100 mm

D	S	L	Code
15	9	100	ZOBO762339
20	9	100	ZOBO762344
25	9	100	ZOBO762349
30	9	100	ZOBO762354

Chrome steel drilling system 3 Ø 31-50 mm

(ZOBO3-03)

The chrome steel drill bit is particularly suitable for soft and hardwood.
Drilling diameter 31 - 50 mm
Shank diameter 12 mm
Total length 100 mm

D	S	L	Code
32	12	100	ZOBO762107
34	12	100	ZOBO762109
35	12	100	ZOBO762110
40	12	100	ZOBO762115
45	12	100	ZOBO762120

Carbide drilling system 3 Ø 31-50 mm

(ZOBO3-04)

The carbide drill bit WD HW is particularly suitable for hardwood and boards.
Drilling diameterge 31 - 50 mm
Shank diameter 12 mm
Total length 100 mm

D	S	L	Code
35	12	100	ZOBO762359
40	12	100	ZOBO762364
45	12	100	ZOBO762369
50	12	100	ZOBO762374

Chrome steel drilling system 3 Ø 50 - 100 mm

(ZOBO3-05)

The chrome steel drill bit is particularly suitable for soft and hardwood.
Drilling diameter 50 - 100 mm
Shank diameter 20/13 mm
Total length 150 mm

D	S	L	Code
50	20/13	150	ZOBO762126
55	20/13	150	ZOBO762131
60	20/13	150	ZOBO762136
65	20/13	150	ZOBO762141
68	20/13	150	ZOBO762144
70	20/13	150	ZOBO762146
75	20/13	150	ZOBO762151
80	20/13	150	ZOBO762156
85	20/13	150	ZOBO762161
90	20/13	150	ZOBO762166
95	20/13	150	ZOBO762171
100	20/13	150	ZOBO762176

Carbide drilling system 3 Ø 50-100 mm

(ZOBO3-06)

The carbide drill bit WD HW is particularly suitable for hardwood and boards.
Drilling diameter 50 - 100 mm
Shank diameter 20/13 mm
Total length 150 mm

D	S	L	Code
60	20/13	150	ZOBO762385

Chrome steel drilling system 3 Ø 101 - 130 mm

(ZOBO3-07)

The chrome steel drill bit is particularly suitable for soft and hardwood.
Drilling diameter 101 - 130 mm
Shank diameter 30/16 mm
Total length 150 mm

D	S	L	Code
110	30/16	150	ZOBO631379
120	30/16	150	ZOBO631390
130	30/16	150	ZOBO631401

Countersink set

(ZOBO3-12)

In a size 1 SYSTAINER with beech lining.

Including the references:
- ZOBO762126 - ZOBO762136 - ZOBO762141 - ZOBO762146 - ZOBO762156 - ZOBO762232 - ZOBO762236 - ZOBO762240 - ZOBO762244 - ZOBO762589

Code

Drill bits for stair drilling system made of chrome steel Ø 10 - 30 mm

(ZOBO5-01)

- For precision depth drilling thanks to different extensions

- Repeated drilling operations with the same drill depth thanks to the depth stop

depth

- with adapted centering point and quick fitting of tool bits

for strings or handrails of staircases

The WD C chrome steel drill bit, with centering point CP-WD 2.5 x 3.5, is particularly suitable for soft and hardwood.<

Drilling diameter: 10 - 30 mm

Shank diameter: 9 mm

Total length: 100 mm

D	S	L	Code
10	9	100	ZOBO762508
11	9	100	ZOBO762509
12	9	100	ZOBO762510
13	9	100	ZOBO762511
14	9	100	ZOBO762512
15	9	100	ZOBO762513
16	9	100	ZOBO762514
17	9	100	ZOBO762515
18	9	100	ZOBO762516
19	9	100	ZOBO762517
20	9	100	ZOBO762518
21	9	100	ZOBO762519
22	9	100	ZOBO762520
23	9	100	ZOBO762521
24	9	100	ZOBO762522
25	9	100	ZOBO762523
26	9	100	ZOBO762524
27	9	100	ZOBO762525
26	9	100	ZOBO762526
29	9	100	ZOBO762527
30	9	100	ZOBO762528

Centering point and pilot drill

(ZOBO3-08)

D	LU
6	6	Centering point for WD C 15-50 mm and WD HW 15-50 mm	ZOBO762622
6	20	Pilot drill for WD C 15-50 mm and WD HW 15-50 mm	ZOBO762619
6	50	Pilot drill for WD C 15-50 mm and WD HW 15-50 mm	ZOBO762617

Guide pin Ø 15 - 50 mm

(ZOBO3-09)

Guide pin with centre hole of diameter 6 mm for WD C 15-50 and WD HW 15-50.

D	Code
6	ZOBO762213
7	ZOBO762214
8	ZOBO762215
9	ZOBO762216
10	ZOBO762217
11	ZOBO762218
12	ZOBO762219
13	ZOBO762220
14	ZOBO762221
15	ZOBO762222
16	ZOBO762223
17	ZOBO762224
18	ZOBO762225
25	ZOBO762712

Centering point and pilot drill

(ZOBO3-13)

D	L
10	9	Centering point for WD C 50-130 mm and WD HW 50-100 mm	ZOBO762621
10	10	Pilot drill for WD C 50-130 mm and WD HW 50-100 mm	ZOBO629393
10	85	Pilot drill for WD C 50-130 mm and WD HW 50-100 mm	ZOBO762618

Guide pin

(ZOBO3-14)

Guide pin with centre hole of diameter 10 mm for WD C 50-130 and WD HW 50-130.

D	Code
10.5	ZOBO762229
11.5	ZOBO762230
12.5	ZOBO762231
13.5	ZOBO762232
15.5	ZOBO762234
16.5	ZOBO762235
17.5	ZOBO762236
19.5	ZOBO762238
20.5	ZOBO762239
21.5	ZOBO762240
22.5	ZOBO762241
24.5	ZOBO762243
25.5	ZOBO762244

Extensions and shanks

(ZOBO3-15)

L	D	SW
20	60	M12 / SW17	Drill extension D50-100mm	ZOBO762599
20	300	M12 / SW17	Drill extension D50-100mm	ZOBO762600
30	60	M16 / SW27	Drill extension D101-130mm	ZOBO762601
30	300	M16 / SW27	Drill extension D101-130mm	ZOBO762602
16	55	M12 / SW17	Drill extension D50-100mm	ZOBO761974
12	100	M16 / SW27	Drill extension D50-100mm	ZOBO761977
16	100	M16 / SW27	Extension for drill D101-130mm	ZOBO761980
20	100	M16 / SW27	Extension for drill D101-130mm	ZOBO761981
M12		MK3	Taper shank for drill bit D50-100mm	ZOBO762447
M16		MK3	Taper shank for drill bit D101-130mm	ZOBO762448
16	55	M12 / SW17	Shank for power drill for drill bit of D50-100mm	ZOBO761976
13	100	M12 / SW17	Shank for power drill for drill bit of D50-100mm	ZOBO629394
16	100	M12 / SW17	Shank for power drill for drill bit of D50-100mm	ZOBO761978
16	100	M16 / SW27	Shank for power drill for drill bit of D101-130mm	ZOBO761982
20	100	M16 / SW27	Shank for power drill for drill bit of D101-130mm	ZOBO761983

Reducing sleeve

(ZOBO3-16)

Code
MK3/MK2	ZOBO762495

Depth stop

(ZOBO3-11)

Code
	Depth stop To limit the cutting depth with STL type system 3 drill bits from diameter 101mm.	ZOBO631402
	Drill guide To adjust the cutting depth with STL type system 3 drill bits from diameter 101mm.	ZOBO631369

Wood professionals

Discover our entire catalogue.